WEPP 2036+ GDI - Protection has been specially developed to clean and protect the injector nozzles of GDI systems (Gasoline Direct Injection Systems). 2036+ safely and quickly cleans injector deposits, intake ports, intake valves, which result in increased fuel consumption, reduced power, poor throttle response and improves fuel efficiency and bad cold start behavior. 2036+ improves friction between the pistons and cylinders. Improves emissions and dissolves residues in the combustion chamber. Reduces engine knock and protects the entire injection system against corrosion. 2036+ GDI - Protection can be used in both GDI engines and port fuel injectors.

Features:

• “Real“ cleaner for Gasoline Direct Injection Systems

• Removes carbon from GDI nozzles and the piston head

• Reduces friction between piston and cylinder

• Cleans inlet valves and injection nozzles from PFI engines

• Improves combustion and performance

• Gets rid of misfire, stumble, rough idle and power loss

• Reduces emissions

• Disperses water and protects against corrosion

• Can be used in all kinds of gasoline engines

WEPP 2188 Octane Booster increases the octane number on petrol fuels with low octane number and on engines with a higher demand of octane. Protects the valve seats on unleaded petrol. Improves the cold start ability and the full-load engine operation.

Features:

• Increases the octane number according to the petrol up to 8 points

• Cleans the whole system from the petrol tank to the combustion chamber

• Cleans residues and deposits in the injection system, intake valves and injection nozzles

• Improves the engine operation, the throttle response and the cold start performance of the engine

• Reduces petrol consumption

• Reduces loss of engine performance

WEPP 2010 Engine System Cleaner provides excellent cleaning of the entire engine system with engine oil-specific high-performance detergents. It is 100% free of solvents, dissolves and binds black sludge and solid particles, keeps them in suspension and flushes them out. For professional preparation of an oil change. Recommended for all diesel and petrol engines with and without TURBO/KAT/DPF. For solving problems with delayed oil changes, suspected black sludge, loss of compression in the area of the piston rings, and hydraulic valve tappet noises. Acids caused by oil aging are neutralized and rinsed out. Provides an improved wear protection during cleaning.

Features:

• 100% free of solvents

• Cleans the variable valve timing parts of the engine

• Loosens and binds black sludge, keeps it in suspension and reliably flushes it out

• Can remain in the used oil for several 100km until the next oil change if there is heavy soiling

• Intensive cleaning with motor oil-specific high-performance detergents

• Improved protection against wear during cleaning

• Acids caused by oil aging are neutralized and flushed out

• Sticked piston rings are released again - compression will be increased

• Doesn’t affect any rubber parts such as gaskets etc.

WEPP 2095 Rapid sealant is a black, high-performance, elastic and easy-to-use box sealant. It can be used as substitute for many different kinds of gaskets.

Features:

·         stays elastic for a long time

·         oil and petrol resistant

·         UV-resistant

·         temperature resistant from -60°C to +260°C

·         easy-to-use pressurized cartridge, no additional mastic gun needed

WEPP 2111 Ceramic Engine Protection reduces the “blow-by-effect” as well as petrol and oil consumption. Protects against reduced lubrication, for example, through oil loss. Improves engine elasticity, engine output and cold start performance. Reduces wear and noise. Successive grinding parts, stay longer separated with increasing load. Finely divided, colloidal ceramic particles reduce friction.

Features:

• Contains ceramic particles smaller 0,50µm

• Improves lubrication inside the engine

• Reduces oil consumption

• Improves the cold start performance

• Reduces friction, wear and noises

• Reduces the “blow-by-effect”